PRODUCTS LIST
SDC-45T
turret
Description
- When requested,8-position turret is available which allowing for mounting I.D and O.D tool for turning intricate parts.
- Tool holders are conveniently and fast changed.
| SPECIFICTAION | SDC-45T |
|---|---|
| Contoller | SYNTEC 10.4" (PIO5） |
| Max. Turning Dia. | ψ290mm |
| Max. Turning Length | 300mm |
| Swing over cross slide | ψ175mm |
| Max. Swing Dia. | ψ375mm |
| Between center | 300mm |
| X axis travel | 145+5mm |
| Z axis travel | 300mm |
| Chuck | 6" 3 jaw chuck/collet |
| Spindle nose | A2-5 |
| Spindle bearing | ψ80mm |
| Hole through spindle | ψ56mm |
| Bar Capacity | ψ45mm |
| Spindle speed | 50~4500rpm |
| Spindle motor | 7.5HP/5.5KW |
| Ballscrew | (X)ψ32*5P/(Z)ψ32*10P |
| X.Z axis servo motor | 1KW |
| Max. X.Z. Traverse | 20 m/mm |
| Hydralic Turret / Servo Turret | LS-160*8T |
| Hydraulic Tailstock | |
| Cutting tools | 20 mm |
| Max. boring tool size | ψ25 mm |
| Hydraulic motor | 1 HP |
| Coolant motor | 1/4 HP |
| Tank capacity | 112L |
| 1HP Powerful type tank capacity | 128L |
| Total power | 12HP |
| KGS New weight | 2300 |
- 6" 3 Jaw hydraulic chuck
- Chuck control foot switch
- Work light
- Tools & tool box
- Cooling system
- Leveling screw & pad
- Heat exchanger
- 8 Position hydraulic turret
- Spindle 50~4500 RPM
- End face tool holder
- Boring tool holder
- Inside tool socket (8,10,12,16,20mm)
- Full splash guard
- Rotary hydraulic cylinder
- Inverter motor 7.5HP
- A2-5 Spindle nose
- Air blower
- 10.4" TFT color monitor
- Simulating hand wheel
- Customer provide cutting tools
- Chip conveyor
- Part catcher
- Transformer (15 kva.)
- Constant voltage regulator (15 kva.)
- Machinery installation fee(exclude round trip air ticket)
- Wooden case/crate/pallet